TUNIT INSTALLATION
The Tunit is supplied with Original Manufacturers Connections to allow simple installation and removal. Professional installation can be carried out worldwide by our network of Agents and Installers followed by a test drive. Our dealers also offer a Bespoke tune through the live tuning service as well as excellent local after care. with a full test drive. Tunit is not invasive of original equipment in the same way chip tuning, car remapping or any other type of engine map so it can be removed when changing vehicles. Self installation is achievable for almost any customer with a few tools however we always recommend a visit to one of our dealers for the full service. Full instructions and support is provided by phone and email from 9am to 9pm.
TUNIT DIESEL
Remove the vehicle engine cover
Turn off the engine and remove the key. Allow your engine to cool and then remove the Engine Cover.
Original plug is unplugged
Find the location of the plug using the instructions provided. Disconnect the original plug and connect the Tunit harness.ngs.
Secure Harness and Tunit
Secure the Harness and Tunit in place using the adhesive strips and cable ties, refit the engine cover and close your bonnet.
Enjoy!
Test drive and enjoy the performance and fuel economy improvement.
TUNIT PETROL
Turn off the engine and remove the Key
Locate the OBD Plug
The OBD plug is normally around the drivers footwell. Connect the Tunit harness into this.
Secure Harness and Tunit
Secure the Harness and Tunit in place using the adhesive strips and cable ties.
Enjoy!
Test drive and enjoy the performance and fuel economy improvement.
TUNIT POWER PEDAL
Locate The Original Plug
Locate the connector on your accelerator pedal and unclip.
Connect The Power Pedal
Connect the adapter cable provided with the Power Pedal to the accelerator connection.
Mount the control
Fix the throttle pedal back in place and mount the Power Pedal control onto your dash.
Enjoy!
Test drive and enjoy the performance and fuel economy improvement.
